SINE AND SQUARE WAVE GENERATOR (AUDIO OSCILLATOR)- TESTRONIX-72
SINE AND SQUARE WAVE GENERATOR
(AUDIO OSCILLATOR) Testronix – 72
OUTPUT WAVEFORMS : Sine and square waves, simultaneously available on 2 separate connectors.
FREQUENCY RANGE : 1 hertz to 1 mega hertz, selected by continuously adjustable dial and a6 step decade control. The dial accuracy is ± 5% ±1°.
OUTPUT AMPLITUDE (SINE WAVE) : 0 to 30 volts peak into open circuit, selected by continuously adjustable control and a 3 step decade control. The amplitude level is flat within ±0.5 db over the entire frequency range. (To be checked with low capacitance probes and high frequency oscilloscopes)
OUTPUT AMPLITUDE (SQUARE WAVE) : 0 to 15 volts peak to peak into open circuit, continuously adjustable.
OUTPUT IMPEDENCE : 600 ohms.
PROTECTION : Both output are short circuit protected.
DISTORTION : Less than 0.5% from 100 hertz to 100 kilo hertz.
SQUARE SYMMETRY : Duty cycle of square wave output is continuously adjustable
from 0% to above 70%.
RISE AND FALL TIME (SQUARE WAVE OUTPUT) : Less than 100 nano seconds. (To be checked with low capacitance probes and high frequency oscilloscopes)
POWER REQUIREMENT : 230 ±10% volt, AC, 50/60 hertz, 5 VA.
SIZE AND WEIGHT : 85 mm (H) x 195 mm (W) x 240 mm (D).3Kgs.
STANDARD ACCESSARIES : One Meter long Banana to Crocodile test lead pair and instructions manual.
SINE AND SQUARE WAVE GENERATOR (AUDIO OSCILLATOR)- TESTRONIX-72
SINE AND SQUARE WAVE GENERATOR
(AUDIO OSCILLATOR) Testronix – 72
OUTPUT WAVEFORMS : Sine and square waves, simultaneously available on 2 separate connectors.
FREQUENCY RANGE : 1 hertz to 1 mega hertz, selected by continuously adjustable dial and a6 step decade control. The dial accuracy is ± 5% ±1°.
OUTPUT AMPLITUDE (SINE WAVE) : 0 to 30 volts peak into open circuit, selected by continuously adjustable control and a 3 step decade control. The amplitude level is flat within ±0.5 db over the entire frequency range. (To be checked with low capacitance probes and high frequency oscilloscopes)
OUTPUT AMPLITUDE (SQUARE WAVE) : 0 to 15 volts peak to peak into open circuit, continuously adjustable.
OUTPUT IMPEDENCE : 600 ohms.
PROTECTION : Both output are short circuit protected.
DISTORTION : Less than 0.5% from 100 hertz to 100 kilo hertz.
SQUARE SYMMETRY : Duty cycle of square wave output is continuously adjustable
from 0% to above 70%.
RISE AND FALL TIME (SQUARE WAVE OUTPUT) : Less than 100 nano seconds. (To be checked with low capacitance probes and high frequency oscilloscopes)
POWER REQUIREMENT : 230 ±10% volt, AC, 50/60 hertz, 5 VA.
SIZE AND WEIGHT : 85 mm (H) x 195 mm (W) x 240 mm (D).3Kgs.
STANDARD ACCESSARIES : One Meter long Banana to Crocodile test lead pair and instructions manual.